Skip to content


Brew Glitter FAQ: How to Keg Glitter Beer-Brew Glitter®

Brew Glitter FAQ: How to Keg Glitter Beer

Ok, so you have a special event coming up at your brewery and you either bought our Brew Glitter® products or are thinking of buying our Brew Glitter® so you can make glitter beer! But, just one problem, how the heck do you keg glitter beer? Chances are, you never had to do it and just aren't sure how to keg beers & brews using "glitter"? Well, we do know how and we are going to tell you how!
Tricks of the trade:
Here are some helpful tips and "tricks of the trade" to teach you how keg glitter beer!
So first after you will want to send all the kegs through the keg washer. Then pull aside the kegs you are going use to Beer’dazzle to turn your beers into glitter beer! Once you've determined which kegs those are, depressurize them and then remove the spear.
Next, pour the glitter into the keg through the keg spear port and then reseal the spear and locking ring. Then go ahead re-pressurize the keg through a sanke connected to CO2. After you get your kegs back to the pressure that you have set for our normal kegging process, just fill like any other keg.
One last “trick of the trade” is that you may want to store all of your kegged glitter beers upside down in the cooler until you are ready to tap them. That way when we are ready to tap the beer, you just flip the keg right before which gets all the glitter back into suspension as best as it can.
So what's all the buzz, why even put "glitter" in beer?
Glitter beers are absolutely amazing for special occasions and most certainly will WOW your customers & your staff and give you a leg up on the competition! Because the "specialty" glitter beers are different, people love to take selfie's of them with their glitter beer so you can be sure you will get some great social media publicity for your beers and your brewery! Happy brewing and enoy using our Brew Glitter® products!
Previous article National Beer Week


wallo - August 23, 2019

Amazing article! The instructions were very helpful, everything turned out very well for us. If anyone is intrested in learning more about beer kegs then check out this awesome site

Liam Fetski - March 3, 2019

WOW! We bought your Brew Glitter and Brew Dust glitter products in bulk for our brewery in Southern, CA – and we followed the instructions in this article & blog post, PERFECT! Our beer with your Gold, Purple, Blue and Rose Gold glitter colors were a massive hit! Customer for Life! ~ Tadpole Brewing Co

Nathan G - February 10, 2019

This article was amazing, it was dead on! We bought a lot of your Gold, Silver and Clear Shimmer Brew Glitter and we were able to keg the glitter beer following these steps without a hitch! Appreciate the “tricks of the trade” section to… upside down kegs was genius! We went through 22 “beer glitter” kegs in less than 3 hours!
~ Northern California Brewery

Leave a comment

Comments must be approved before appearing

* Required fields